Care and Maintenance Tips

For regular dusting, use a dry cloth. For cleaning or in case of a spill, use a damp cloth and natural soap. Do not use soap containing detergent or other chemicals. Dry with a soft clean cloth to prevent spotting. Spills should be removed immediately.

Do not use steel wool, sandpaper, mineral acid, bleach or chlorine cleaners on surfaces.

We always recommend protecting surfaces with coasters or place-mats as extreme and repetitive daily use of heat or cold can damage the finish. Ensure any excess water or dampness is wiped dry immediately to prevent marking the surface.

Do not drag the product along the floor, as it might damage the protective coating, cause rusting, or leave permanent marks on floor. Always lift product when moving them from place to place. Always ensure water and solutions used to clean the floor do not come in contact with the product’s base, as it might leave permanent marks.

Product is for indoor use only. Avoid exposure to extreme conditions and do not place near heating sources or air-conditioners. Recommended humidity in the room is between 40% to 60%, and ideal room temperature is between 14 °C/57 °F and 21 °C/70 °F.

TECHNICAL ASSISTANCE OR ADVICE

If technical assistance or advice are offered or given to Buyer, direct or indirect, such assistance or advice is given free of charge and only as an accommodation to Buyer. This assistance or advice, or Buyer’s use of such assistance or advice, shall not subject Seller to any liability whether it be contract, warranty (express or implied), tort (including negligence) or otherwise.